Ramuc Premium Synthetic Rubber-Based Coating A-2

A2 Premium Rubber-Based Coating Ramuc Type A-2 Premium Rubber is an excellent choice to recoat previously painted chlorinated rubber and synthetic rubber painted pools, specifically in VOC restricted areas. It is VOC Compliant for all 50 states and Canada. For compatibility purposes, the existing paint on a previously painted surface should be determined before painting. If the existing surface is unknown, paint chips can be taken to any Ramuc distributor/dealer to be forwarded to the Ramuc laboratory for analysis. Aged plaster should be checked for integrity. Check for hollow or weak/crumbling plaster by using a ball-peen hammer or any other comparable method. Perform repairs to the plaster before painting. Restrictions: Do not use on bare fiberglass or spas. Use Ramuc Type EP or Hi-Build Epoxy. In non-VOC affected states, consider using Premium Ramuc Type A Chlorinated Rubber on previously painted chlorinated rubber surfaces. Notes: Coverage: 200-300 sq ft per gal on bare surfaces; 350-400 sq ft per gal on recoats Must be applied to dry surfaces Not for use on spas or fiberglass/gelcoat pools Application: roller/brush/spray Fill time: 5 days outdoors, 10-14 days indoors Clean up: Ramuc thinner or Xylene Mixing: mechanically mix

• Superior coverage rate compared to other rubber based paints
• High gloss finish allows for easy cleaning
• Easy to apply by roller or airless spray
• Self-priming
• Two-coat system
• Use SKID-TEX additive to achieve a non-slip surface